How To Remove Old Style Door Knobs
Old style door knobs – Some older houses were built with very small cabinets and wardrobes, telling homeowners to lay wardrobes no matter what space they could find. Often this resulted in cabinets that were built without doors, simply because there was no room for a full size door.
12 Photos Gallery of: How To Remove Old Style Door Knobs
Select a line 6 mm (1/4 inch) from the front edge of the old style door knobs of the door frame. Install the track to the top of the door frame, feed on this line. Use the wooden screw as in the door kit. Install the upper guide in the top slot. Install it on the right side of the track if your door is on the right. Let it be loose for adjustments. Pre-drill the screw holes for the bottom frame guide and the door frame. Use a 1.5mm (1/16 inch) piece. Attach the bottom guide to the door frame and jamb on the same side of the doorway as the upper handlebar. Screws for this are also provided in the door kit.
Locate the drilling position on the upper edge of the turn side of the old style door knobs and install the upper control tab. Put the roll in the pre-drilled hole on the opposite upper corner of the door. Install the toothed steering pin in the pre-drilled hole located on the turn side of the door bottom.Tag : old style door knobs