Leakage around the sides and bottom of the frameless shower door are usually the result of misaligned door hinges. Frameless shower doors use two or three hinges, depending on the size of the door and the weight of the glass. Fitting frameless glass shower door hinges usually solves most of the loss problems. It is necessary to have an assistant.
Because the door has to be lifted from the outside while the screws of the hinges, which are inside the shower, are adjusted. So, to adjust frameless glass shower door hinges is, starting with open the shower door completely. Place a level on the wall of the shower when the door closes. If the wall is out of lead, the problem is with the formulation of the shower. And it takes a professional to carry out the tiles and the wedge out of the frame.
12 Photos Gallery of: Shower Door Hinges: Adjust The Hinges For Glass Shower Doors Without Frame
Stand inside the shower and close the shower door. Loosen the screws on the door hinges with a Phillips screwdriver. Just turn each screw two revolutions. Consult your assistant to place 3/8 inch wedges between the bottom of the door and the shower tray. The shower door hinges will snap back as you slide the wedges under the door. Re-tighten all the hinge screws. Remove the wedges and operate the door. If necessary, loosen the screws in the door lock and move it up or down as necessary before retightening the screws.Tag : adjust glass shower door, how to adjust a shower door hinge, adjusting frameless glass shower door hinges, shower door hinges