Turning Iron Door Handles
Iron door handles – Turning a door handle is a simple task that you can fill in just a few minutes. With a pair of screws, turn the knob around to keep the children or pets unintentionally locked in a room. You can use these instructions to help you move a door handle to another door as well as, for example, to tighten the door of your child’s room with the non-lockable door in your wardrobe. Just take away the anger according to the instructions and change them
12 Photos Gallery of: Turning Iron Door Handles
Look at the screws in the plate that holds the iron door handles to the door. If there is one + form in the center, you need a Phillips screwdriver, with a cross at the end. If there is a single line cut in the screw head, you will need a flat screwdriver. Use a screwdriver to remove the screws that hold the door handle to the door. Tighten the screws and pull the door handle apart. Grasp the steering wheel on each side of the door and pull them out of the door. Allow center mechanism. The wrath stays on the plate that holds them to the door.
Place the steering wheel that was inside the door on the outside so that the pipe passes through the holes. Place the steering wheel on the outside of the cover on the inside so that the pipes meet the tubes on the other steering wheel. Make sure both iron door handles are against the door. Insert the screws into the holes and use the screwdriver to tighten them.iron door handles